Input
 
@Practical Quality Control(sm) - your source for practical quality
@Practical Quality Control(sm) - your source for practical quality

Home     Search     Ask the Expert     Newsletter      Links      Site Map      Contact Us

Product Design      EMC Guide      National Variants     Telecoms Design Guide      FAQ

Click here to order standards from

Advertise with i-Spec          Contact  advert@i-spec.com for details

Note that references are to IEC 60950 Third Edition 1999-04. Where the references in the Second Edition differ, they appear in parentheses.

REQUIREMENT

The steady state input current of the equipment shall not exceed the rated current by more than 10% under normal load.

TEST METHOD

The product operated at the rated voltage. The input current is measured using a true-RMS meter, and the reading is compared with the rated current.

REFERENCE

Complete requirements are given in IEC 60950, Clause 1.6.2 (1.6.1).

Subscribe to our newsletter:
Enter your
email address
subscribe
unsubscribe
 

IEC 60950

Basics

Product Design

Telecoms Design Guide

EMC Guidebook

 

  Disclaimer and Acknowledgment   

© i-Spec.com Ltd. 1999-2004. All rights reserved.

All extracts from the publication IEC 60950 have been reproduced by kind permission of the International Electrotechnical Commission (IEC). Copyright © IEC, Geneva, Switzerland.